####################################################
### V6 Resource File                             ###
### generated on: Mon Feb 06 17:00:36 EST 2012   ###
###                                              ###
### This file is designed to be delivered to the ###
### translator.                                  ###
####################################################
57=Loading...
123=Error while writing input file from In Model
353=Elapsed time limit:
362=Run Control
385=Main Mesh Data:
635=SEATBELT
719=All Uncheck
1737=Select directory failed.  {0}
2363=Message
2583=Airbag
4626=AIRBAG
5239=SID
5463=Inflator SFO:
5686=Parameter
6064=Name
6163=Poisson's Ratio
6345=AIRBAG WANG
6432=File List
6687=File parsing Warning
7443=BARRIER
8040=Y_Value=SFO*(Y_Original+OFFO)
8244=Preparation Finished
8647=LCID
9160=Prepare File
9191=Output
10910=Please input CheckFile name!
11288=RemoteUserName:
11683=CheckFile
11782=TBD
11873=Y\ Axis
12784=Value
12817=Command File
13047=All UnCheck
13080=Difference
13245=AIRBAG INTERACTION
14295=MAT FABRIC
14326=Script Setting
14587=RemoteUnixWorkDir:
15142=File "{0}" cannot be found.
15665=SECTION_ID
16126=SFO
16179=RootDirName:
16535=Prepare
17002=Error occurs when parsing files: <br>{0}
17502=Selected file will be divided into two files as : \n 1. OLDFILENAME_mesh.key - to save FEM mesh data information ; \n 2. OLDFILENAME_main.key - to save other remaining information in the original file.
17663=Please select a file for "{0}"
18163=Key File:
18933=Divide
19337=Parsing
19402=File
19466=SFA
19673=Inflator SFO
20349=Error occurs when parsing command line.
20622=Required File List
20798=ELA
21081=Would you like to save the content you are editing?
21147=Please input a valid key file path!
22266=CURVE_ID(for *Load, *Boundary, etc.)
22350=<<Back
23284=Shell Thickness
23383=ETAN
23470=Copy File Error
23597=LS-DYNA Prepare Wizard
23704=TTF
24102=LCSS
24871=EPSScale
26349=Create File
26886=Error parsing command line,Parameter block in command do not matches the pattern.
27126=Next>>
27199=RemoteWorkDir:
27383=File Path Warning
27890=<HTML>No parameters are selected to check on,<br>Would you like to check all parameters on?</HTML>
28014=Model File
28106=Shape Factor:
28334=Loading file information to prepare...
28511=Add as parameters
28667=OFFO
28846=Sorting By Checked
29912=Copy file "{0}" failed.{1}
30626=Please input RunDynaFile.
30873=Script Setting Warning
31248=ControlFile:
31543=RemoteWorkDir is not Specified. Do you want to skip it now?
31955=Finish
32596=Find
33073=Parameter List:
33119=CURVE_ID(*MAT)
33289=BOXID
34255=RIGIDWALL
34624=Material Property
34785=Add Output Files
36203=Coordinates
36316=ESScale
37014=RemoteUnixWrkdir is not Specified. Do you want to skip it now?
37119=No Parameters Selected
37703=seconds
39460=Young's Modulus
39630=Airbag_ID
40979=Customization Edit Option
41731=MAT_ID
45187=Analysis Control
45530=RemoteUserName is not Specified. Do you want to skip it now?
45648=ES
47022=Airbag_ID2
47855=Create File Error
48267=Output File List
48846=SIGY
49005=ELA:
49630=LCID:
49871=Dy
51491=Mass Density
52781=Define Curve
53046=EPS
53442=RootDirName is not Specified. Do you want to skip it now?
53847=Basic
54093=Browse
54401=Cancel
54537=Inputted directory for "{0}" file doesn't exist now. Are you sure to input this one?
54981=Help
55170=Airbag_ID1
55584=OFFA
55780=Work directory is not specified.Please specify it first.
57003=<HTML>Error occurs when parsing files: <br>{0}
57258=Work Directory Warning
57307=PID:
57491=NSID
58453=FLC
58545=All Check
58931=RemoteHostIP is not Specified. Do you want to skip it now?
59236=Initial Velocity
59883=Command Line
59913=AREA:
60181=Subfolder for Include Files:
60445=File Path&Name
60466=Ignore Noneexistent Included Files
60536=Change file path and name
61335=LS-DYNA executing returned {0, number}
61671=Initial Velocity Generation
62426=File Path
62668=Create "{0}" file Failed.
63504=Move parameter up
64327=FAC:
64438=Error occurs when updating key files.
64982=Create New Script
65866=PID
66366=Selection Warning
67140=NewPoint=OriginalPoint+D
67404=Dx
67509=Remove this parameter
67622=LS-DYNA: Prepare didn't completed.
67690=Failed to read bat file content.
68330=CURVE_ID
68398=No Change
69180=PART_ID
69582=Error parsing command line,Can not find specified parameter.
69870=<HTML>Specified work directory is a exist file. <br>Do you want to use this file name to create directory now?</HTML>
69938=Path
70315=Remove parameters
71124=Input
71138=LS-DYNA Parameter
71170=Read Key File
71775=P
71895=NSIDEX
72485=Subfolder Name Warning
72915=Running LS-DYNA: 
73691=Error occurs when retrieve variables from Fiper environment.
73923=Edit
74170=Work Directory:
74308=AREA
75579=Add this parameter
75647=Nochange Setting Warning
75853=Remove Selected Files
76218=Files
76754=Select a directory as Wizard Work Directory to save prepared files.  If file size is too large and include FEM mesh data,  it's strongly recommended to divide it to two files,  this will be very useful to improve LS-DYNA Comp execution speed.
77171=FLC:
77496=Updated File
78275=Advance
78545=X\ Axis
78816=Dz
79052=TTF:
79255=Model
79511=Create work directory failed.
79561=Required Files
79613=FAC
80056=Standard Output
80378=X_Value=SFA*(X_Original+OFFA)
80418=LCSR
80619=New Parameter
81247=VentleholeSize Scale
81335=Save
81725=Please input ControlFile.
82224=RunDynaFile:
82572=Error parsing command line,command is null
83461=Add Required Files
83583=VentleholeSize(A23)
83944=Velocity
84474=VentleholeSize Scale:
84512=Not supported model file format or invalid file path!
84813=InflatorCurve_ID:
85099=<HTML>No parameters are selected to uncheck.<br>Would you like to uncheck all parameters?</HTML>
86088=Shear Modulus
86202=Input RunDynaFile format is not correct,Please input *.bat or *.sh file.
86883=Section_ID
87087=Shape Factor
87247=Error occurs when execution LS-DYNA.
87354=OK
87849=Invalid license configuration, contact Engineous support.
88362=File Dividing Introduction
88469=Failed license check.
88565=File selection
88767=Z\ Axis
88802=Thickness
90594=Uncheck
90823=<HTML>{1}<br>Divide {0} file failed.</HTML>
90896=FAIL
90934=Move parameter down
93425=InflatorCurve_ID
93746=VentholeSize(A23):
94801=Param Name
94908=Would you save the setting information?
95464=Execute
95705=Nochange
95759=Barrier
96163=STYP
96266=LS-DYNA: Command wasn't specified.
96905=RemoteHostIP:
98216=Subfolder name is illegal,Name cannot include '/', '\',':','*','?','"' ,'<','>','|'
98296="{0}" default setting is nochange file! Are you sure to change it?
98595=C
98743=Process completed
98867=Check
98868=Path of LS-DYNA exe\ :
98869=Failed to retrieve the default Command or Path 
98870=LS-DYNA
98871=Failed to load preferences
98872=Error while applying changes to LS-DYNA preferences
98873=Failed to retrieve the default Command or Path
98874=Browse...
98875=Failed to close the license for LS-DYNA component.
98876=LS-DYNA Preferences
98877=Error updating the 'isCommandSpecified' property
98878=LS-DYNA executable file path
98879=Command for execution\ :
98880=Error while initializing LS-DYNA preferences panel
98881=Please browse LS-DYNA executable file
98882=Read File Error
98884=Parameters
98885=Please select proper executable file. \n eg. ls971_s_R5.1.1_win32_p.exe or dyna.bat file
98886=<< Back
98887=File Selection Error
98889=Next >>
98890=File not found
98891=Path of LS-DYNA exe\ \ \ \ \ \ \ :
98892=Unable to initialize the component.
98893=File {0} does not exist at configured location on disk,hence will be written to the temporary directory.
98894=Unable to dispose the key file. {0}
98895=Default Command : {0}
98896=File {0} does not exist at the configured location on disc nor it is stored in the model.
98897=Unable to retrieve properties. {0}
98898=Model image file is not present at the configured location.
98899=Preferred command : {0}
98900=Following Non-Existent Files are ignored:\ \n
98901=Following file/files can not be found : \n{0} \nNote : You can check 'Ignore Nonexistent included files' option before reading the input file. \n OR    Ensure existence of include files at correct location.
98902=Unable to create Prepare Wizard. : {0}
98903=Non-Existent Files Ignored
98905=Unable to finish Preparation Wizard : {0} 
98906=Subfolder name is illegal,Name cannot include '/', '\',':','*','?','"' ,'<','>','|'
98907=Please select a working directory for the wizard to save prepared files. For large files which include FEA mesh data, consider dividing the model into multiple files using Include files. This will greatly improve component performance.
98909=Please check the accessories to be parsed and also specify the files corresponding to the checked accessories. Unchecked accessories will not be displayed in Input Tab.
98910=Unable to save model file image with model!
98911=Subfolder name is illegal,Name cannot include '/', '\\',':','*','?','\"' ,'<','>','|'
98912=Error creating script file

####################################################
###   Meta Model I18N string                       #
####################################################
description=Exchange data with and execute LS-DYNA
displayname=LS-DYNA
images/add.gif=images/add.gif
images/arrow.gif=images/arrow.gif
images/check.gif=images/check.gif
images/down.gif=images/down.gif
images/files.gif=images/files.gif
images/left.jpg=images/left.jpg
images/remove.gif=images/remove.gif
images/unCheck.gif=images/unCheck.gif
images/up.gif=images/up.gif
longdescription=LS-DYNA is an explicit type of analysis solver which is used to solve multi-physics problems including solid mechanics, heat transfer, and fluid dynamics. The primary function of this component is to update LS-DYNA key file without launching LS-DYNA software.


# 19-June-2020:
# These property strings were updated to replace the word "master" with "principal".
# Corresponding strings in *.java files have also been updated.  
# Corresponding JA property strings have not been changed.
4270=Update Principal File Error
23547=File name and path can be defined as Isight parameter,  according to path and name parameters, file can be dynamically loaded in; Path parameter default value can be inputted in Path column. Principal file and new divided file cannot be selected.
37027=Update principal file "{0}" failed. {1}
62940=Work directory cannot be same as Principal File directory,Please select another one.
93072=Principal File:
98908=If you do not want to change or parse any of the included file, then you can check the 'Nochange' checkbox next to the file name. Principal file can not be selected.

